Page #16
|
INSTALLATION MANUAL
|
STEP 5: PAGE 1 OF 5
|
CLASSIC CURVED ROOF SUNROOM: Roof solid and Glass Installation
MATERIALS NEEDED
| The Straight Eave Attachment Channel will be pre-punched
for Rafter installation but the Straight Eave Header Beam is not. Hold the Header Beam up
to and aligned with the Attachment Channel and mark the hole locations on to the Header
Beam. It is critical that the hole locations are marked accurately, if the alignment is
even slightly off the room will not install properly. Prior to securing the two end
(right and left) Rafters to Header Beam and Attachment Channel, it is very important to
make sure that the Front Wall Modules are plumb, see Diagram 5.1 |
DIAGRAM 5.1
|
|